6 Way mounting base for 1170 series Circuit Breakers

This base for the 1170 type circuit breaker will accommodate up to 6 circuit breakers of the same or mixed amperage ratings. The range is available from 3 amps to 30 amps and the amperage rating is etched on top of each circuit breaker. Each rating is also identified with an industry standard colour coded manual release trip lever. The base will mount into a 96.50 x 27.00 mm panel cut out and is retained by one 4mm screw at each end. The polarised detachable lid is secured in place by a central thumbscrew and seats against a gasket on the base unit. Each position is fitted with two spade terminals on the input and output for 6.3 x 0.8mm female cable receptacles, these are accessible from the rear of the panel after the base is installed.