Speed Sensors
Brand: Magneti Marelli
SKU: MC13-357SEN8K3
A range of cost effective inductive sensors for speed detection of ferrous toothed wheels. Features include a PA 6.6 GFR case, silicon extension lead and moulded 2 / 3 pin Minitimer connection...
£47.79
Brand: MoTeC
SKU: MC12-353005
130mm Pitot tube assembly. Maximum 50mbar differential (up to~330 kmh). Pitot Tubes are used for air speed measurement, which gives a reference speed when analysing aerodynamic performance data. The assembly supplied by MoTeC Europe includes a pitot tube and attached differential pressure sensor. Th..
£0.00
Brand: MoTeC
SKU: MC12-353009
150mm Pitot tube assembly. Maximum 70mbar differential (up to~390 kmh). Pitot Tubes are used for air speed measurement, which gives a reference speed when analysing aerodynamic performance data. The assembly supplied by MoTeC Europe includes a pitot tube and attached differential pressure sensor. Th..
£0.00
New
Brand: MoTeC
Magnetic Sensor Amplifiers - The Dual Magnetic Converter (DMC) converts magnetic style signals to open collector output signals – a square wave. This makes a typical magnetic sensor behave as a switched or Hall Effect sensor, to make the signals suitable for use with MoTeC ECUs and loggers.This allo..
£0.00
New
Brand: MoTeC
Magnetic Sensor Amplifiers - The Dual Magnetic Converter (DMC) converts magnetic style signals to open collector output signals – a square wave. This makes a typical magnetic sensor behave as a switched or Hall Effect sensor, to make the signals suitable for use with MoTeC ECUs and loggers.This allo..
£0.00
New
Brand: MoTeC
Magnetic Sensor Amplifiers - The Dual Magnetic Converter (DMC) converts magnetic style signals to open collector output signals – a square wave. This makes a typical magnetic sensor behave as a switched or Hall Effect sensor, to make the signals suitable for use with MoTeC ECUs and loggers.This allo..
£0.00
Brand: MoTeC
SKU: MC13-353118
Magnetic Sensor Amplifiers - The Dual Magnetic Converter (DMC) converts magnetic style signals to open collector output signals – a square wave. This makes a typical magnetic sensor behave as a switched or Hall Effect sensor, to make the signals suitable for use with MoTeC ECUs and loggers.This allo..
£76.00
Brand: MoTeC
SKU: MC13-357101
This Gear Tooth Sensor uses a magnetically biased Hall effect integrated circuit to accurately sense movement of ferrous metal targets. This specially designed I.C., with discrete capacitor and bias magnet, is sealed in a probe type package for physical protection. Ideal for wheel speed measurement ..
£63.00
Brand: MoTeC
SKU: MC13-357111
This stainless steel M12 barrel sensor ferrous metal targets with fast operating speeds from 0-15kHz. It is capable of withstanding temperature ranging from -40 to +100 deg C. The signal output will switch to ground (sink outputs with internal pull-up resistors) which make it suitable for use on a d..
£113.00
Brand: MoTeC
SKU: MC13-357104
A Cost effective inductive sensor for speed detection of ferrous toothed wheels. Features include a PA 6.6 GFR Case, silicone lead and moulded 2 pin junior timer connector..
£62.00
