Engine Management (ECU)
Brand: MoTeC
SKU: MC31-326112
M600 Drive by Wire -Allows control of Fly by Wire type throttles (Contact MoTeC for supported vehicle models) The M400 and M600 systems have the ability to switch on options by purchasing an upgrade password. Upgrade options include: logging, wideband lambda and over run boost , advanced drive by wi..
£280.34
Brand: MoTeC
SKU: MC31-326103
M600 Dual Lambda Upgrade (single lambda a pre-requisite) The M400 and M600 systems have the ability to switch on options by purchasing an upgrade password. Upgrade options include: logging, wideband lambda and over run boost , advanced drive by wire and camshaft control (Contact MoTeC for vehicles s..
£202.23
Brand: MoTeC
SKU: MC31-326102
M600 Single Lambda UpgradeThe M400 and M600 systems have the ability to switch on options by purchasing an upgrade password. Upgrade options include: logging, wideband lambda and over run boost , advanced drive by wire and camshaft control (Contact MoTeC for vehicles supported for drive by wire thro..
£421.58
Brand: MoTeC
SKU: MC31-326117
M600 Over Run Boost (Anti-Lag), The M400 and M600 systems have the ability to switch on options by purchasing an upgrade password. Upgrade options include: logging, wideband lambda and over run boost , advanced drive by wire and camshaft control (Contact MoTeC for vehicles supported for drive by wir..
£191.53
Brand: MoTeC
SKU: MC31-326104
The MoTeC M600 Pro Analysis Upgrade provides access to advanced i2 Pro data analysis software with multiple graph overlays, X-Y plots, advanced maths functions, synchronised video (manual alignment), and flexible layouts to accommodate virtually any user preference. Requires the Data Logging upgrade..
£620.60
Brand: MoTeC
SKU: MC31-326116
M600 Variable Camshaft Control -Allows Closed Loop control of multiple Camshafts (Contact MoTeC for supported models)The M400 and M600 systems have the ability to switch on options by purchasing an upgrade password. Upgrade options include: logging, wideband lambda and over run boost , advanced driv..
£252.52
Brand: MoTeC
SKU: MC31-328111
The MoTeC M800-M880 ECU 10-12 Cylinder Sequential Support Upgrade enables up to 4 ignition outputs to be used as injector outputs, allowing for 10/12 high ohm injectors...
£309.23
Brand: MoTeC
SKU: MC31-328101
The MoTeC M800 ECU Data Logging Memory only upgrade allows recording of all ECU data to the 1 MB internal logging memory and analysing the data with MoTeCs i2 Standard software. This option is enabled for a free evaluation period of the first 8 hours engine running time when the ECU is first issued ..
£191.53
Brand: MoTeC
SKU: MC31-328105
The MoTeC M800 ECU Advanced Functions Upgrade enables;Traction Control and Launch Control (2, 3 or 4 wheel)Gear Change Ignition Cut (flat shifts)Overrun Boost Enhancement (anti-lag)..
£315.65
Brand: MoTeC
SKU: MC31-328116
The MoTeC M800-M880 Continuously Variable Camshaft Control Upgrade enables camshaft control with each cam independently adjustable in 0.5 degree increments based on RPM and load...
£252.52
Brand: MoTeC
SKU: MC31-328112
The MoTeC M800-M880 ECU Drive by Wire Throttle Control Upgrade enables control of the throttle body actuator by interpreting the drivers pedal input via sensors. Compatible with most OEM electronic throttles...
£280.34
Brand: MoTeC
SKU: MC31-328103
Note: Single lambda must be enabled first. Dual Lambda allows Wideband Lambda (Air Fuel Ratio) measurement for a second lambda sensor, which may be used for data logging or closed loop control of the Air Fuel Ratio. The ECU is compatible with Bosch LSU or NTK wideband lambda sensors, it is not compa..
£202.23