MoTeC M800 Series ECU
Brand: MoTeC
SKU: MC31-328111
The MoTeC M800-M880 ECU 10-12 Cylinder Sequential Support Upgrade enables up to 4 ignition outputs to be used as injector outputs, allowing for 10/12 high ohm injectors...
£309.23
Brand: MoTeC
SKU: MC31-328101
The MoTeC M800 ECU Data Logging Memory only upgrade allows recording of all ECU data to the 1 MB internal logging memory and analysing the data with MoTeCs i2 Standard software. This option is enabled for a free evaluation period of the first 8 hours engine running time when the ECU is first issued ..
£191.53
Brand: MoTeC
SKU: MC31-328105
The MoTeC M800 ECU Advanced Functions Upgrade enables;Traction Control and Launch Control (2, 3 or 4 wheel)Gear Change Ignition Cut (flat shifts)Overrun Boost Enhancement (anti-lag)..
£315.65
Brand: MoTeC
SKU: MC31-328116
The MoTeC M800-M880 Continuously Variable Camshaft Control Upgrade enables camshaft control with each cam independently adjustable in 0.5 degree increments based on RPM and load...
£252.52
Brand: MoTeC
SKU: MC31-328112
The MoTeC M800-M880 ECU Drive by Wire Throttle Control Upgrade enables control of the throttle body actuator by interpreting the drivers pedal input via sensors. Compatible with most OEM electronic throttles...
£280.34
Brand: MoTeC
SKU: MC31-328103
Note: Single lambda must be enabled first. Dual Lambda allows Wideband Lambda (Air Fuel Ratio) measurement for a second lambda sensor, which may be used for data logging or closed loop control of the Air Fuel Ratio. The ECU is compatible with Bosch LSU or NTK wideband lambda sensors, it is not compa..
£202.23
Brand: MoTeC
SKU: MC31-328115
The MoTeC M800-M880 ECU Multipulse, Multispark Upgrade enables configuring ignition to fire multiple times and injectors to open twice per cycle...
£179.76
Brand: MoTeC
SKU: MC31-328117
The MoTeC M800-M880 ECU Overrun Boost Enhancement Upgrade enables boost control to reduce turbo lag and improve throttle response in tight and twisty stages for turbocharged cars, specifically in rally events.Overrun boost enhancement is available separately or as part of Advanced Functions Upgrade..
£191.53
Brand: MoTeC
SKU: MC31-328104
The MoTeC M800-M880 ECU Pro Analysis Upgrade provides access to advanced i2 Pro data analysis software with multiple graph overlays, X-Y plots, advanced maths functions, synchronised video (manual alignment), and flexible layouts to accommodate virtually any user preference. Requires the Data Loggin..
£620.60
Brand: MoTeC
SKU: MC31-328109
Enables the ECU to send telemetry data via a radio to the pits. The data can be viewed in graphical format using the MoTeC Telemetry Monitor program. (Available on M800 & M880 only)...
£556.40
Brand: MoTeC
SKU: MC31-328113
The MoTeC M800-M880 Servo Motor & Stepper Motor Control Upgrade allows the use of a 3D table to control a fast response, high torque DC or stepper motor...
£179.76
Brand: MoTeC
SKU: MC31-328102
Allows Wideband Lambda (Air Fuel Ratio) measurement, which may be used for data logging or closed loop control of the Air Fuel Ratio. The ECU is compatible with Bosch LSU or NTK wideband lambda sensors, it is not compatible with the Bosch 4 wire LSM sensor. (Dual Lambda not available on M400) (Lambd..
£421.58